
Industrial Maintenance Technnician Diploma
Manufacturing Industrial Technology (MIT): Industrial maintenance technology
General Education Courses
Course | Credit | Notes |
---|---|---|
Written Communication, Oral Communications, or Heritage/Humanities | 3 | |
MAT 116 Technical Mathematics OR Higher-Level Quantitative Reasoning course |
3 | |
General Education Subtotal | 6 |
Technical Core Requirements
Course | Credit | Notes |
---|---|---|
BRX 120 Basic Blueprint Reading OR BRX 110 Basic Blueprint Reading for Machinist OR BRX 112 Basic Reading for Machinist OR ELT 102 Blueprint Reading |
2-4 | BRX 112 is ECTC course substitution |
(FPX 100 Fluid Power AND FPX 101 Fluid Power Lab) OR ELT 265 Applied Fluid Power |
3-5 | |
EET 119 Basic Electricity (ECTC preferred course) OR ELT 110 Circuits I* OR (IMT 110 Industrial Maintenance Electrical Principles AND IMT 111 Industrial Maintenance Electrical Principles Lab) |
5 | Recommended first semester Prereq: KYOTE Math 6 |
(EET 268 Rotating Machinery Electrical Motor Controls I AND EET 269 Rotating Machinery and Motor Controls I Lab*) OR (IMT 220 Industrial Maintenance Electrical Motor Controls I AND IMT 221 Industrial Maintenance Electrical Motor Controls I Lab) OR (EET 270 Electrical Motor Controls I AND EET 271 Electrical Motor Controls I Lab) OR ELT 244 Electrical Machinery and Controls OR (IMT 120 Industrial Maintenance Rotating Machinery AND IMT 121 Industrial Maint. Rotating Machinery Lab) OR (EET 264 Rotating Machinery AND EET 265 Rotating Machinery Lab) |
4-7 | EET 268/269 is ECTC course substitution. Prereq: ELT 110 or EET 119 with a grade of C or better or program advisor consent. |
(EET 276 Programmable Logic Controllers AND EET 277 Programmable Logic Controllers Lab) OR (IMT 280 Advanced Programmable Logic Controllers AND IMT 281 Advanced Programmable Logic Controllers Lab) OR IET 203 Programmable Logic Controllers |
4-5 | |
(WLD 120 Shielded Metal Arc Welding AND WLD 121 Shielded Metal Arc Welding Fillet Lab) OR (WLD 140 Gas Metal Arc Welding AND WLD 141 Gas Metal Arc Welding Fillet Lab) OR (IMT 100 Welding for Maintenance AND IMT 101 Welding for Maintenance Lab) OR WLD 152 Basic Welding B |
5 | |
Digital Literacy | 3 | |
IMT 150 Maintaining Industrial Equipment I AND IMT 151 Maintaining Industrial Equipment I Lab |
5 | |
IMT 289 Industrial Maintenance Capstone | 1 | |
Technical Core Subtotal | 28-32 |
Recommended Technical Electives
Thirteen credit hours of electives must be taken from the approved list. This list is not all inclusive. Other technical elective courses may be taken with approval of the program instructor/advisor.
Course | Credit | Notes |
---|---|---|
ACR 100 Refrigeration Fundamentals AND ACR 101 Refrigeration Fundamentals Lab |
5 | |
ACR 102 HVAC Electricity AND ARC 103 HVAC Electricity Lab |
5 | |
ACR 130 Electrical Components AND ACR 131 Electrical Components Lab |
5 | Prereq: ACR 102 with C or better |
ACR 170 Heating Load and Duct Design | 3 | |
ACR 250 Cooling and Dehumidification AND ACR 251 Cooling and Dehumidification Lab |
5 | Prereq: ACR 100/101 |
ACR 260 Heating and Humidification AND ACR 261 Heating and Humidification Lab |
6 | Prerq: ACR 102/103 |
ARC 270 Heat Pump Application AND ACR 271 Heat Pump Application Lab |
5 | Prereq: ACR 100 and ACR 102 with C or better |
ACR 290 Journeyman Preparation | 3 | |
AIT 130 Measurement and Instrumentation | 4 | |
AIT 140 Industrial Controls I | 4 | |
AIT 150 Industrial Controls II | 4 | |
AIT 160 Workplace Safety | 1 | |
AIT 200 Process Management and Quality Control | 4 | |
BRX 110 Mechanical Blueprint Reading for Machinist | 2 | If not taken in core courses |
BRX 112 Blueprint Reading for Machinist | 4 | If not taken in core courses |
BRX 120 Basic Blueprint Reading | 3 | If not taken in core courses |
BRX 210 Mechanical Blueprint Reading | 2 | Prereq: BRX 110 |
CAD 100 Introduction to Computer Aided Design | 3 | |
CAD 103 CAD Fundamentals | 4 | |
CAD 112 Engineering Graphics | 4 | Prereq: CAD 102 with C or better |
CAD 120 Introduction to Architecture | 4 | Prereq: CAD 100 or CAD 103 with C |
CAD 150 Programming in CAD | 4 | Prereq: CAD 100 or CAD 103 with C |
CAD 200 Intermediate Computer Aided Drafting | 4 | Prereq: CAD 100 or CAD 103 with C |
CAD 201 Parametric Modeling | 4 | |
CAD 212 Industrial Drafting Processes | 4 | Prereq: CAD 100 or CAD 103 with C |
CAD 216 Building Information Modeling | 4 | |
CAD 220 Architectural Design | 4 | Prereq: CAD 120 with C or better |
CAD 222 Mechanical Design | 4 | Prereq: CAD 100 or CAD 103 with C |
CAD 230 Construction Techniques | 4 | Prereq: CAD 120 with C or better |
CAD 240 Advance Dimensioning/Measurement | 4 | Prereq: CAD 100 or CAD 103 with C |
CAD 292 Industrial Applications | 4 | Department Consent required |
CMM 110 Fundamentals of Machine Tools-A | 3 | |
CMM 112 Fundamentals of Machine Tools-B | 4 | Prereq: CMM 110 with C or better |
CMM 114 Fundamentals of Machine Tools | 7 | |
CMM 120 Applied Machining I | 3 | Prereq: CMM 110/112 or CMM 114 with C or better |
CMM 122 Applied Machining II | 4 | Prereq: CMM 120 with C or better |
CMM 124 Applied Machining | 7 | Prereq: CMM 110/112 or CMM 114 with C or better |
CMM 130 Manual Programming | 3 | |
CMM 132 CAD/CAM/CNC | 3 | |
CMM 134 Manual Programming CAD/CAM/CNC | 6 | Prereq: CMM 110/112 or CMM 114 with C or better |
CMM 152 Jigs, Fixtures and Gaging | 3 | |
CMM 214 Industrial Machining | 6 | Prereq: CMM 122 or CMM 124 with C or better |
CMM 224 Advanced Industrial Machining | 6 | Prereq: CMM 134 and (CMM 212 or 214) with C or better |
CMM 230 Conversational Programming | 6 | Instructor consent required |
CMM 240 Introduction to 3D Programming | 6 | Prereq: (CMM 130 and 132) or (CMM 134 or 138) with C or better |
CMM 298 Practicum | 1 | Instructor Consent required |
COE 199 Cooperative Education | 1-8 | Instructor Consent required |
DPT 100 Introduction to 3D Printing Technology | 3 | |
DPT 102 3D Printing Technology Fundamentals | 2 | |
DPT 150 Introduction to Engineering Mechanics for 3D Printing | 3 | |
DPT 280 Special Projects for 3D Printing, Level I | 1 | |
EET 119 Basic Electricity | 5 | If not taken in core courses |
EET 127 Electrical Capstone | 1 | Instructor Consent required |
EET 148 Electronic Drafting | 3 | |
EET 150 Transformers AND EET 151 Transformers Lab |
3 | Prereq: EET 110 or EET 119 with C or better |
EET 154 Electrical Construction I AND EET 155 Electrical Construction I Lab |
4 | |
EET 250 National Electrical Code | 4 | Prereq: (EET 154/155 and EET 252/253) or EET 254/255 with C |
EET 252 Electrical Construction II AND EET 253 Electrical Construction II Lab |
4 | Prereq: EET 154 |
EET 254 Electrical Construction AND EET 255 Electrical Construction Lab |
7 | |
EET 264 Rotating Machinery AND EET 265 Rotating Machinery Lab |
4 | Prereq: EET 110 or EET 119 with C or better |
EET 266 Rotating Machinery and Transformers AND EET 267 Rotating Machinery and Transformers Lab |
6 | Prereq: EET 110 or EET 119 with C or better |
EET 270 Electrical Motor Controls I AND EET 271 Electrical Motor Controls I Lab |
4 | Prereq: EET 110 or EET 119 with C or better |
EET 272 Electrical Motor Controls II AND EET 273 Electrical Motor Controls II Lab |
4 | Prereq: EET 270 |
EET 276 Programmable Logic Controllers AND EET 277 Programmable Logic Controllers Lab |
4 | Prereq: ELT 110 or EET 119 with grade of C or better and (EET 270/272 or EET 268 or EET 274) |
EET 278 Electrical Motor Controls II and PLCs AND EET 279 Electrical Motor Controls II and PLCs Lab |
7 | |
EET 283 Special Problems II | 2 | Instructor Consent required |
EET 286 Programmable Logic Controllers II AND EET 287 Programmable Logic Controllers II Lab |
4 | Prereq: EET 276/277 with C or better |
ELT 106 Mechanical Engineering Graphics | 2 | |
ELT 110 Circuits I | 5 | If not taken in core courses |
ELT 114 Circuits II | 5 | Prereq: ELT 110 with C or better |
ELT 120 Digital I | 3 | |
ELT 122 Mechanical Power Transmission Systems AND ELT 124 Mechanica Power Transmission Systems Lab |
4 | |
ELT 210 Devices I | 4 | Prereq: ELT 110 with C or better |
ELT 214 Devices II | 4 | Prereq: ELT 210 with C or better |
ELT 220 Digital II | 4 | Prereq: ELT 120 with C or better |
ELT 243 Electric Power Distribution | 3 | |
ELT 250 Programmable Logic Controllers | 4 | Prereq: ELT 244 or program advisor consent |
ELT 260 Robotics and Automation | 5 | Instructor Consent required |
ELT 261 Instrumentation and Measurements | 3 | |
ELT 265 Applied Fluid Power | 3 | If not taken in core courses |
ELT 289 Engineering and Electronics Technology Capstone | 1 | |
FPX 100 Fluid Power AND FPX 101 Fluid Power Lab |
5 | If not taken in core courses |
IET 1301 Safety Culture | 1 | |
IET 1302 5S | 1 | |
IET 1303 Total Production System Maintenance | 1 | |
IET 1304 Program Solving | 1 | |
IET 1305 Maintenance Reliability | 1 | |
IMT 100 Welding for Maintenance AND IMT 101 Welding for Maintenance Lab |
5 | |
IMT 110 Industrial Maintenance Electrical Principles AND IMT 111 Industrial Maintenance Electrical Principles Lab |
5 | |
IMT 115 Maintenance Machining I AND IMT 116 Maintenance Machining I Lab |
7 | |
IMT 120 Industrial Maintenance Rotating Machinery AND IMT 121 Industrial Maintenance Rotating Machinery Lab |
5 | |
IMT 130 Industrial Maintenance Electrical Concepts | 6 | |
IMT 160 FANUC Robot Operations | 2 | |
IMT 161 KUKA Robot Level I Robot Operations | 2 | |
IMT 162 YASKAWA/MOTOMAN Robot Operations | 2 | |
IMT 198 Practicum | 1-8 | Program Coordinator Consent |
IMT 199 Cooperative Education | 1-8 | Program Coordinator Consent |
IMT 200 Industrial Robotics and Robotic Maintenance | 4 | Prereq: IMT 110/111 |
IMT 220 Industrial Maintenance Electrical Motor Controls I AND IMT 221 Industrial Maintenance Electrical Motor Controls I Lab |
5 | Prereq: IMT 110/111 |
IMT 222 Industrial Maintenance Motor Controls II AND IMT 223 Industrial Maintenance Motor Controls II Lab |
4 | Prereq: IMT 110/111 and IMT 220/221 |
IMT 230 Industrial Maintenance of PLCs AND IMT 231 Industrial Maintenance of PLCs Lab |
7 | Prereq: IMT 240 |
IMT 240 Industrial Maintenance Motor Control Concepts AND IMT 241 Industrial Maintenance Motor Control Concepts Lab |
10 | Prereq: IMT 110/111 or IMT 130/131 with a grade of C or better |
IMT 250 Maintaining Industrial Equipment II AND IMT 251 Maintaining Industrial Equipment II Lab |
5 | Prereq: IMT 150/151 with a grade of C or better |
IMT 280 Advanced Programmable Logic Controllers AND IMT 281 Programmable Logic Controllers Lab |
5 | Prereq: IMT 220/221 with a grade of C or better |
IMT 290 Special Problems | 1-3 | Program Coordinator Consent |
ISM 102 Fundamentals of Instrumentation | 4 | |
ISM 210 Fundamentals of Process Control | 4 | |
ISX 100 Industrial Safety | 3 | |
ISX 101 Introduction to Industrial Safety | 3 | |
MFG 265 Robotics and Industrial Automation | 2 | |
MST 200 Advanced Hydraulic Systems AND MST 201 Advanced Hydraulic Systems Lab |
5 | Prereq: FPX 100/101 |
MST 204 Advanced Pneumatic Systems AND MST 205 Advanced Pneumatic Systems Lab |
5 | |
MST 206 Electro-hydraulics AND MST 207 Electro-hydraulics Lab |
5 | |
PLB 150 Plumbing, Introduction to the Trade | 3 | |
PLB 151 Basic Plumbing Skills | 3 | |
PHS 175 Applied Physics | 6 | Coreq: MAT 126 |
PHX 150 Introductory Physics | 3 | Prereq: MAT 116 or MAT 126 |
PMX 100 Precision Measurement | 3 | |
WLD 100 Oxy-Fuel Systems AND WLD 101 Oxy-Fuel Systems Lab |
4 | |
WLD 120 Shielded Metal Arc Welding AND WLD 121 Shielded Metal Arc Welding Lab |
5 | |
WLD 123 Shielded Metal Arc Welding Groove with Backing Lab | 3 | Prereq: WLD 120/121 |
WLD 130 Gas Tungsten Arc Welding AND WLD 131 Gas Tungsten Arc Welding Fillet Lab |
5 | |
WLD 133 Gas Tungsten Arc Welding Groove Lab | 3 | Prereq: WLD 130 |
WLD 140 Gas Metal Arc Welding AND WLD 140 Gas Metal Arc Welding Fillet Lab |
5 | |
WLD 143 Gas Metal Arc Welding Groove Lab | 3 | Prereq: WLD 140 |
WLD 145 Gas Metal Arc Welding Aluminum Lab | 1 | Prereq: WLD 140 |
WLD 151 Basic Welding A | 2 | |
WLD 152 Basic Welding B | 5 | |
WLD 170 Blueprint Reading for Welding AND WLD 171 Blueprint Reading for Welding Lab |
5 | |
WLD 220 Welding Certification AND WLD 221 Welding Certification Lab |
5 | |
WPP 220 Workplace Principles | 3 | |
PROGRAM TOTAL | 50-58 |
*If EET 268/269 are taken, 3 credits may be used as electives.
Progression in the Industrial Maintenance Technology program is contingent upon achievement of a grade of "C" or better in each technical course and a maintenance of a 2.0 cumulative grade point average or better (on a 4.0 scale).
For a list of KCTCS general education classes in each category, go to https://kctcs.edu/education-training/course-catalog/2020-2021-KCTCS-Catalog.pdf, pp. 67-71.
Or KCTCS homepage (kctcs.edu) > education & training > course catalog > 2020-21 catalog > pp. 67-71.
Updated June 2019